HIL Test Engineer

Mill
San Bruno, CA
On-site

Who this role is best for

A natural match if you have hands-on HIL test experience with electromechanical systems and strong Simulink modeling skills.

Best fit for

  • Candidates with HIL test experience and a background in electromechanical systems integration
    — “Hardware-in-the-loop (HIL) Test Engineer to own the test station for Mill Commercial's program”
  • Individuals who have built and maintained plant models in Simulink for thermal or mechanical systems
    — “Build and maintain plant models in Simulink (oil jacket thermal, air heater and airflow, vessel cool-down, grinder load torque)”
  • Candidates who can debug at the signal level and translate requirements into automated tests
    — “Debug failures to root cause across the rig, the plant model and the firmware”

Things to consider

  • This role requires a strong foundation in both hardware and software testing domains
    — “You'll work day to day with Firmware, Systems, Test Engineering and EE”
  • The role demands a high level of technical autonomy and ownership of complex test infrastructure
    — “Own the HIL test station end to end: rig hardware, I/O and emulation modules, wiring and harnessing to the DUT”

How to stand out

  • Highlight experience with Simulink Real-Time and real-time simulation tools in your resume and interviews
    — “Strong Simulink and MATLAB: you've built and tuned plant models”
  • Demonstrate your ability to write automated test cases that integrate into CI pipelines
    — “Translate engineering and safety requirements into automated HIL test cases with programmatic pass/fail”
  • Emphasize your hands-on bench skills and signal-level debugging capabilities in your application materials
    — “Comfortable with signal-level work: thermocouples, strain gauges, hall-effect and discrete inputs”
Pace · SteadyCollaboration · HighAutonomy · HighDecision Impact · Team

Derived from job-description analysis by Serendipath's career intelligence engine.

What success looks like

  • Own the HIL test station end to end
  • Build and maintain plant models in Simulink
Typical background
4+ years in test, controls or systems engineering on electromechanical products

Skills & requirements

Required

HIL TestingReal-time SimulationPlant ModelingFault InjectionAutomated Testing

Preferred

Electromechanical SystemsEmbedded SystemsFirmware Development

Stack & domain

HIL TestingHardware And Sensor EmulationPlant Model DevelopmentAutomated TestingFirmware DebuggingSignal-level WorkSimulinkMatlabC Code ReadingElectromechanical Product TestingProblem-solvingTeamworkCommunicationHardware TestingElectromechanical SystemsFirmware Development

About the role

Original posting from Mill via Greenhouse

Mill is a waste prevention technology company reimagining what it means to eliminate waste, starting with food. We build smart systems and infrastructure for homes, businesses, and municipalities that transform food scraps from landfill-bound waste into valuable resources, including chicken feed. Tens of thousands of Mill’s residential food recyclers are already helping households divert millions of pounds of food scraps every year, paving the way for our upcoming launch of Mill Commercial—the industry’s first end-to-end solution for managing, understanding, and preventing food waste in commercial environments (e.g. grocery, restaurants, food services). At Mill, we are passionate about building easy-to-use, beautifully designed technologies that keep food in the food system and out of landfills.

About the Role

We're looking for a Hardware-in-the-Loop (HIL) Test Engineer to own the test station for Mill Commercial's program including hardware, sensor and actuator emulation, and plant models: systems to emulate include safety interlocks, load cells, motor feedback, thermocouples, and heater elements. 

This is a hands-on, build-and-maintain role. You'll take the station from vendor commissioning to a working bench, then keep extending it: adding channels and fault-injection paths, writing and tweaking the thermal and torque plant models in Simulink, and turning engineering requirements into automated tests that run in CI. You'll work day to day with Firmware, Systems, Test Engineering and EE, and you'll be the person who knows why a test passed or failed at the signal level.

What You'll Do

Own the HIL test station end to end: rig hardware, I/O and emulation modules, wiring and harnessing to the DUT, power and reset control, and the bench equipment around it

Lead vendor commissioning and bring-up, then take over the station as the in-house owner once the vendor hands off

Build and maintain plant models in Simulink (oil jacket thermal, air heater and airflow, vessel cool-down, grinder load torque) and keep them correlated against real-device data

Extend the rig to cover new tests: add emulation channels, fault-injection paths (thermocouple open/short/drift, disconnected interlock lines, degraded tach signals) and timing capture as the test plan grows.

Translate engineering and safety requirements into automated HIL test cases with programmatic pass/fail, and integrate them into the Linux-based CI regression

Debug failures to root cause across the rig, the plant model and the firmware, working with Firmware and EE to tell a real defect from a test-infrastructure issue

Keep the station reliable: calibration, spares, documentation, and a known-good configuration that other engineers can run tests on without you

Partner with SW QA to define test plan based on product requirements and ensure the station can test all cases

Partner with Systems and Test Engineering on the boundary between HIL coverage, bare-board tests and full-system tests

What We're Looking For

4+ years in test, controls or systems engineering on electromechanical products, with at least 2 years hands-on with HIL or real-time simulation rigs

Strong Simulink and MATLAB: you've built and tuned plant models (thermal, mechanical or electrical) and deployed them to a real-time target

Able to read and trace C code: you can follow firmware control logic well enough to understand what a test is exercising and where a failure originates

Comfortable with signal-level work: thermocouples, strain gauges, hall-effect and discrete inputs, PWM drive lines, and the I/O modules that emulate them

Practical bench skills: wiring, harness build, oscilloscope and DMM work

Strong documentation and organization skills

Experience with test automation: scripting test sequences, programmatic pass/fail, results logging, and integrating into a regression pipeline

Clear, direct communicator: you write test cases others can run and you explain rig behavior to firmware engineers in their terms

Nice to Have

Hands-on experience with Speedgoat, dSPACE, NI VeriStand or similar HIL hardware, including Simulink Real-Time or an equivalent toolchain

Experience working with Linux-based embedded systems (Jetson, Yocto or Debian-class targets) and Linux CI tooling

Familiarity with standard automation APIs such as ASAM XIL, or with Python-based test frameworks and MQTT

Background in safety and interlock testing, fault injection, or functional-safety test methods

Experience with thermal or motor-drive systems: heaters, PID loops, DC motor torque and current limiting

Experience at an early-stage hardware startup, where you set up the process rather than inherit it

The estimated base salary range for this position is $165K to $185K, which does not include the value of benefits or a potential equity grant. A wide range of factors are considered in making compensation decisions, including but not limited to skill sets, market conditions, experience and training, licensure and certifications, and business and organizational needs.

Source: Mill careers (Greenhouse)

Similar roles

More roles at Mill