Mechanical Engineering Manager, Fluids Systems

SpaceX
Starbase, TX
On-site

Who this role is best for

Mechanical engineers with industrial fluid systems experience and leadership capabilities will find this managerial role at SpaceX in Starbase, TX, both technically and geographically aligned.

Best fit for

  • Candidates with industrial fluid systems expertise and a track record in leading mechanical engineering teams.
    — “Hire, develop, and direct mechanical engineers.”
  • Individuals with hands-on experience in data center cooling and fluid plant design and commissioning.
    — “Lead the mechanical engineering team that designs, builds, commissions, and sustains data center cooling and fluid systems.”
  • Professionals who can integrate mechanical systems with electrical and control systems.
    — “Partner with electrical, controls, IT infrastructure, construction, and operations.”

Things to consider

  • Onsite presence at Starbase, TX is mandatory with no remote flexibility implied.
    — “Must be able to work onsite at Starbase, TX.”
  • U.S. citizenship or residency is required due to ITAR export regulations.
    — “applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident...”

How to stand out

  • Highlight experience in heat-rejection architecture and system redundancy planning.
    — “Own the heat-rejection architecture from IT load to the ambient sink...”
  • Emphasize your ability to identify design flaws in P&IDs and pump curves.
    — “Demonstrated ability to review a P&ID and pump curve...”
  • Showcase your experience in commissioning and transitioning hardware to operations.
    — “Experience taking hardware through construction and commissioning...”
  • Demonstrate your knowledge of ASME B31.x, ASHRAE, and NFPA standards.
    — “Working knowledge of ASME B31.x piping, ASHRAE data center guidance...”
  • Emphasize your hands-on involvement in water treatment and corrosion control.
    — “Experience with water treatment, materials compatibility, and corrosion control...”
Pace · SteadyCollaboration · HighAutonomy · MediumDecision Impact · Team

Derived from job-description analysis by Serendipath's career intelligence engine.

What success looks like

  • lead the mechanical engineering team that designs, builds, commissions, and sustains data center cooling and fluid systems
Typical background
5+ years of mechanical engineering experience on industrial fluid, HVAC, or process cooling systems

Skills & requirements

Required

Mechanical EngineeringFluid Systems DesignTeam ManagementConstruction ManagementSafety Management

Preferred

Direct Data Center ExperienceASME B31.x PipingAshrae Data Center Guidance

Stack & domain

Mechanical EngineeringData Center CoolingFluid SystemsChilled WaterCondenser WaterCdusRear-door Heat ExchangersLiquid-to-chip LoopsPipingPumpsValvesHeat RejectionP&idsHydraulic CalculationsThermal CalculationsEquipment SpecificationsConstruction DetailsCommissioning ProceduresFlowPressure DropPump SelectionValve SelectionNPSHWater HammerExpansionWater ChemistryFiltrationMaterials CompatibilityLeak DetectionElectricalControlsIT InfrastructureConstructionOperationsCapacity PlanningDesign ReviewsChange ControlRoot-cause AnalysisThermal IncidentsHardware ChangesProcedure ChangesSafetyPressure SystemsWater HandlingConstruction InterfacesLeadershipTeam ManagementDirect FeedbackAnalysisField JudgmentSchedule ManagementCost ManagementVendor Performance Management

About the role

Original posting from SpaceX via Greenhouse

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

MECHANICAL ENGINEERING MANAGER, FLUIDS SYSTEMS

RESPONSIBILITIES:

Lead the mechanical engineering team that designs, builds, commissions, and sustains data center cooling and fluid systems, including chilled water and condenser water plants, CDUs, rear-door and in-row heat exchangers, liquid-to-chip or cold-plate loops where used, piping, pumps, valves, and heat rejection.

Own the heat-rejection architecture from IT load to the ambient sink, including redundancy, failure modes, and ride-through, and hold the plant accountable for temperature, flow, and available IT capacity.

Set technical direction and approve critical work: P&IDs, hydraulic and thermal calculations, equipment specifications, construction details, and commissioning procedures.

Drive design of flow, pressure drop, pump and valve selection, NPSH, water hammer, expansion, water chemistry, filtration, materials compatibility, and leak detection. Require calculations, not vendor defaults.

Partner with electrical, controls, IT infrastructure, construction, and operations so mechanical design matches power, BMS/EPMS, whitespace layout, and how the site is run.

Own capacity planning with operations: current supportable IT load, the first constraint, and what must be built before the next deployment.

Run design reviews, change control, and root-cause on thermal or fluid incidents. Close issues with hardware or procedure changes.

Hire, develop, and direct mechanical engineers. Set clear ownership, give direct feedback, and raise the bar on analysis and field judgment.

Manage schedule, cost, and vendor performance for cooling and fluid scope without giving up technical control.

Treat safety, pressure systems, water and chemical handling, and construction interfaces as non-negotiable.

BASIC QUALIFICATIONS:

Bachelor’s degree in mechanical engineering or another engineering discipline.

5+ years of mechanical engineering experience on industrial fluid, HVAC, or process cooling systems, such as data centers, high-performance computing, power generation, semiconductor facilities, or similar mission-critical plants.

PREFERRED SKILLS AND EXPERIENCES:

Experience leading engineers or serving as the responsible engineer for chilled water, condenser water, or liquid cooling systems, including pumps, piping, heat exchangers, cooling towers or dry coolers, and controls integration.

Demonstrated ability to review a P&ID and pump curve, perform a heat and flow balance, and identify where a design fails under normal and partial-failure conditions.

Experience taking hardware through construction and commissioning, including punch list, test and balance, functional testing, and turnover to operations

Direct data center experience on air-side, liquid-side, or both, including high-density or direct liquid cooling.

Working knowledge of ASME B31.x piping, ASHRAE data center guidance, relevant NFPA requirements, and local mechanical codes as applied to these plants.

Experience with water treatment, materials compatibility, and corrosion control on open and closed loops.

Experience adding new cooling capacity, not only maintaining an existing plant.

Experience coordinating mechanical scope with electrical distribution and a building or plant control system.

ADDITIONAL REQUIREMENTS:

Must be able to work onsite at Starbase, TX.

Ability to work extended hours and weekends as necessary.

ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com. 

Source: SpaceX careers (Greenhouse)

Similar roles

More roles at SpaceX