Principal Power Electronics Engineer

ON.energy
Houston +2 more
On-site

Who this role is best for

Geared toward experienced power electronics engineers comfortable with grid-forming and grid-following control tuning, who can lead product design and collaborate with suppliers and cross-functional teams across multiple US locations.

Best fit for

  • Candidates with 8+ years of hands-on power electronics experience in MW-scale systems
    — “8+ years of hands-on power electronics engineering in project-based or industrial settings”
  • Individuals who have led inverter control tuning and grid compliance testing
    — “Own inverter control settings. Define, tune and maintain the control and protection parameters for MW-scale PCS in GFL and GFM modes”
  • Engineers with experience in simulation tools like PSCAD and HIL testing environments
    — “Ability to read and critically review PSCAD/EMT study reports and HIL (OPAL-RT, Typhoon) results”

Things to consider

  • This role requires a deep understanding of grid codes such as IEEE 2800 and ERCOT rules
    — “Prove grid-code compliance. Demonstrate that the system meets LVRT/HVRT, frequency ride-through, phase-jump, fault-current and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741 and ERCOT rules”

How to stand out

  • Emphasize your ability to analyze fault behavior and provide control recommendations
    — “Analyze fault and weak-grid behavior. Study 3-phase and unbalanced faults, low-SCR operation, paralleled-converter interaction and circulating currents”
  • Showcase your technical writing skills and ability to produce test procedures and reports
    — “Excellent communication across technical and non-technical teams, with clear technical writing for test procedures, reports and settings rationale”
  • Include experience with large-scale battery energy storage systems (BESS) in your application materials
    — “Understanding of how BESS integrates with power electronics equipment”
Pace · SteadyCollaboration · HighAutonomy · HighDecision Impact · Team

Derived from job-description analysis by Serendipath's career intelligence engine.

What success looks like

  • lead PCS product design
  • prove grid-code compliance
Typical background
power electronics engineer

Skills & requirements

Required

Power ElectronicsControl SystemsGrid Compliance

Preferred

AI Integration

Stack & domain

Power Electronics EngineeringElectrical EngineeringPscadOpal-rtTyphoon HILPower ElectronicsData Center

About the role

Original posting from ON.energy via Greenhouse

ON.energy is setting the standard for large load interconnection. ON’s patented AI UPS™ is a medium-voltage UPS that serves as a firewall, protecting the data center from the grid, and the grid from the data center. With multiple gigawatts currently under construction, we are enabling grid-safe data centers. 

We are hiring a Power Electronics Engineer to own the power conversion system (PCS) in our product, both how it is designed and how it behaves. This is a product-focused role. You will lead PCS product design and documentation, tune inverter controls, lead lab and field testing, and prove ride-through and fault compliance in GFL and GFM modes.

You will work closely with our PCS suppliers' controls teams and with our business development, project, commissioning and O&M engineering teams. You will report to the Senior Power Electronics Manager.

What You Will Do

Controls, testing and grid compliance

Own inverter control settings. Define, tune and maintain the control and protection parameters for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop and virtual impedance, current limiting and overload, and ride-through curves. Maintain a controlled settings baseline per project and per firmware release.

Lead system testing. Plan and run grid-integration test campaigns at national-lab and third-party facilities, as well as factory (FAT) and site tests. Write test procedures, analyze waveforms and issue reports.

Prove grid-code compliance. Demonstrate that the system meets LVRT/HVRT, frequency ride-through, phase-jump, fault-current and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741 and ERCOT rules, for both the grid-side GFL converter and the load-side GFM converter.

Analyze fault and weak-grid behavior. Study 3-phase and unbalanced faults, low-SCR operation, paralleled-converter interaction and circulating currents. Recommend control or setting changes and verify them in test.

Support simulation and HIL studies. Work with our modeling team (PSCAD, OPAL-RT, Typhoon HIL) to define study and HIL test cases, supply settings and test data, review reports, and confirm results match field and lab behavior.

Product and project engineering

Lead PCS product design. Recommend design approaches and main-equipment vendors, and participate in product design sprints with the development team.

Serve as technical lead with PCS suppliers. Review firmware releases and change logs, specify required behavior, and qualify new or second-source inverters against a common test set.

Support business development. Prepare technical proposals, including single-line diagrams (SLDs) and general arrangements (GAs) tailored to customer needs.

Support project execution. Compile technical information packages for project engineering, co-lead review and validation of PCS topics, and maintain technical documentation, including as-built drawings.

Support commissioning and O&M. Participate in commissioning, resolve field events from the waveform up, and feed design improvements back into the product.

Required Qualifications

Bachelor's degree in Electrical Engineering, Power Electronics Engineering or a similar field (MS or PhD a plus)

8+ years of hands-on power electronics engineering in project-based or industrial settings

Proven system-level design experience on MW-scale power electronics equipment

Understanding of how BESS integrates with power electronics equipment

Hands-on control design or tuning of three-phase grid-connected inverters: dq current control, PLL and synchronization, and DC-link control

Working knowledge of grid-forming control (droop, VSG, virtual impedance) and how GFM current limiting differs from GFL

Direct experience with ride-through and fault behavior of inverter-based resources (LVRT/HVRT, reactive current injection, negative-sequence response) and the grid codes that govern them

Ability to read and critically review PSCAD/EMT study reports and HIL (OPAL-RT, Typhoon) results, and compare them with measured test data

Experience planning and running tests on MW-scale inverters or BESS: lab, FAT or site commissioning

Ability to produce and read SLDs and GA drawings

Strong waveform and data analysis skills using Python, MATLAB or similar

Excellent communication across technical and non-technical teams, with clear technical writing for test procedures, reports and settings rationale

Preferred Qualifications

Experience with BESS, UPS / mission-critical or utility-scale infrastructure projects, including IEC 62040-3 performance classes

Paralleled converters on common AC and DC buses: load sharing, zero-sequence and circulating-current control, interleaving

Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods

Grid-integration testing at a national lab or accredited facility

Hands-on use of PSCAD, MATLAB/Simulink or real-time simulation (RTDS, OPAL-RT, Typhoon HIL)

ERCOT interconnection experience (NOGRR 245 / 282, large-load ride-through)

Experience working with an inverter OEM's firmware and parameter sets as the customer, not only as the designer

AutoCAD and protection settings coordination

Tools and Standards You Will Work With

Simulation: PSCAD/EMTDC and PSS/E study reports; OPAL-RT and Typhoon HIL results

Test and analysis: Power analyzers, high-speed DAQ, scopes, Python/MATLAB

Grid codes: IEEE 2800, IEEE 1547 / UL 1741 SB, ERCOT Nodal Operating Guides, NERC reliability guidelines

UPS: IEC 62040-3

Equipment: MW-scale liquid-cooled PCS, 1.5 kV DC battery systems, MV transformers

For US-based roles - What you’ll get:

Competitive salary + annual performance-based bonus eligibility

Medical, dental, and vision insurance

401(k) with company match

Paid time off and company holidays 

For Mexico-based roles - What you’ll get:

Competitive salary + annual performance bonus eligibility

Christmas Bonus (Aguinaldo): 30 days

Major medical expenses and life insurance

Paid time off and holidays (per local policy)

For all roles:

Professional development and growth opportunities

Opportunity to grow with a mission-driven team shaping the future of clean energy

Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation.

Benefits vary by role and location and are subject to change.

Agency Notice: ON.energy does not accept unsolicited resumes from staffing agencies, search firms, or third-party recruiters. Resumes submitted without a fully executed Master Services Agreement (MSA) and a written request from an authorized member of our Talent Acquisition team will be considered the property of ON.energy. No placement fees or compensation will be paid for unsolicited candidate submissions.

Source: ON.energy careers (Greenhouse)

Similar roles

More roles at ON.energy