Senior Avionics Technician

Rendezvous Robotics
Golden, CO

Who this role is best for

Candidates with hands-on manufacturing experience and process-building skills will find this senior role in avionics and spacecraft assembly in Golden, CO, highly engaging.

Best fit for

  • Candidates with 5+ years of PCB and wire harness production experience and a background in defining manufacturing processes
    — “5+ years of hands-on experience assembling and reworking PCBAs and wire harnesses in a production or prototype environment”
  • Individuals who have worked on high-reliability systems and are comfortable with documentation and compliance standards
    — “Experience building spacecraft, satellite, aircraft, or other flight hardware, including the documentation discipline that comes with it”
  • Candidates who thrive in small teams and have experience shaping workflows rather than following them
    — “Experience in a startup or small-team environment where you helped define the process rather than inherit it”

Things to consider

  • U.S. person status is mandatory due to ITAR export regulations
    — “applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent”
  • The role involves significant responsibility for quality and compliance with IPC and NASA standards
    — “Hardware leaving your stations is built to drawing, and you are accountable for it”
  • The position may involve working with in-house SMT equipment, requiring hands-on technical adaptability
    — “Help bring up our in-house SMT line: stencil printer setup and evaluation, reflow oven profiling”

How to stand out

  • Emphasize experience in defining and improving production workflows and process documentation
    — “Help build out the manufacturing process: define the tile build flow with manufacturing engineering”
  • Highlight specific IPC and NASA standards training or hands-on experience with them
    — “IPC J-STD-001 Space Addendum, NASA-STD-8739 series, or similar high-reliability workmanship training”
  • Showcase fine-pitch soldering and rework experience, particularly under a microscope
    — “Demonstrated fine-pitch soldering and rework skill under a microscope (0402 passives, QFN/QFP, and similar)”
  • Include experience with MES, ERP, or similar systems for managing work orders and inventory
    — “Experience with an MES, ERP, or similar system for work orders and inventory”
Pace · SteadyCollaboration · MediumAutonomy · MediumDecision Impact · Team

Derived from job-description analysis by Serendipath's career intelligence engine.

What success looks like

  • owning the PCBA and harness stations
  • helping build out the manufacturing process
Typical background
5+ years of hands-on experience in assembling and reworking PCBAs and wire harnesses

Skills & requirements

Required

PCBA AssemblyWire Harness BuildingLight Mechanical AssemblyWork InstructionsQuality Assurance

Preferred

SMT Line SetupTest Fixture Building

Stack & domain

PCBAWire HarnessesLight Mechanical AssemblyIpc-a-610J-std-001Ipc/whma-a-620SMT LineESDFODCleanliness ControlsData AcquisitionFunctional And Environmental TestsTeamworkProblem-solvingAttention To DetailIPC J-std-001SpacecraftHardwareSoftwareSystems Engineering

About the role

Original posting from Rendezvous Robotics via Greenhouse

Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket.

We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering. We are looking for the best people in the world who want to build the next generation of advanced spacecraft.

As our first Senior Technician, you will own the PCBA and harness stations of our production line and help us build the manufacturing process around them. You will assemble and rework printed circuit board assemblies, build and test wire harnesses, and perform light mechanical assembly of our tiles and test hardware, working directly with the engineers who designed them. The process is not finished, and you will help define it: the build flow, the work instructions, the tooling, the in-house surface-mount line, and the workmanship standard for every technician who follows you.

Responsibilities & Ownership

  • Own the PCBA and harness stations as part of the production process: station layout, tooling and consumables, work instructions, throughput, and first-pass yield. Hardware leaving your stations is built to drawing, and you are accountable for it.
  • Help build out the manufacturing process: define the tile build flow with manufacturing engineering, write and validate work instructions in our manufacturing execution system (MES), run first-article builds, and turn the lessons from each build into procedure and tooling updates.
  • Assemble, rework, and inspect printed circuit board assemblies to IPC-A-610 / J-STD-001 Class 3 workmanship: stencil printing, reflow, fine-pitch hand soldering, component rework, cleaning, and conformal coating.
  • Build, route, and test wire harnesses and cable assemblies from drawings and wire lists to IPC/WHMA-A-620: cutting, stripping, crimping with calibrated tooling, pinning, labeling, and continuity / isolation testing.
  • Perform light mechanical assembly of flight and development hardware: fastener installation and torque, threaded insert installation, bonding and staking, and fit checks against drawings.
  • Execute work orders and procedures in the MES, record as-built data and serial numbers, and file anomaly reports when something does not match the drawing.
  • Help bring up our in-house SMT line: stencil printer setup and evaluation, reflow oven profiling, first-article builds, and the work instructions that make them repeatable.
  • Maintain ESD, FOD, and cleanliness controls in the work area; keep tools calibrated, checked out, and accounted for.
  • Support test campaigns: build test fixtures and cabling, set up data acquisition, and assist test engineers during functional and environmental tests.
  • Train and mentor associate technicians and review their work before it moves to the next station.

Basic Qualifications

  • High school diploma or equivalent.
  • 5+ years of hands-on experience assembling and reworking PCBAs and wire harnesses in a production or prototype environment.
  • Current IPC J-STD-001 and IPC/WHMA-A-620 certification, or the ability to obtain certification within 90 days of hire (IPC-A-610 a plus).
  • Demonstrated fine-pitch soldering and rework skill under a microscope (0402 passives, QFN/QFP, and similar).
  • Ability to read and work from schematics, assembly drawings, wire lists, and written procedures, and to flag discrepancies before building to them.
  • Working knowledge of ESD control (ANSI/ESD S20.20 or equivalent program) and FOD prevention.
  • Comfortable with basic bench instruments: multimeter, power supply, and oscilloscope for continuity, isolation, and go/no-go checks.
  • U.S. person status required (see below).

Preferred Qualifications

  • Experience building spacecraft, satellite, aircraft, or other flight hardware, including the documentation discipline that comes with it (traveler sign-off, as-built records, nonconformance reporting).
  • IPC J-STD-001 Space Addendum, NASA-STD-8739 series, or similar high-reliability workmanship training.
  • Experience operating or setting up SMT equipment: stencil printers, pick-and-place, reflow ovens, or inspection systems.
  • Familiarity with conformal coating, potting, staking, and other board-level protection processes.
  • Experience with an MES, ERP, or similar system for work orders and inventory.
  • Forklift or overhead crane certification; comfortable with safe lifting and rigging of hardware.
  • Experience defining or improving a production process: authoring work instructions, first-article builds, yield improvement, 5S, or lean manufacturing.
  • Experience in a startup or small-team environment where you helped define the process rather than inherit it.

Compensation and Benefits

Engineer (Early Career): $80,000 - $110,000

Senior Technician: $36.00 - $60.00 per hour

This is an hourly, non-exempt position, and overtime is paid at 1.5x your hourly rate in line with Colorado law. Your actual level and hourly rate will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. In addition to your hourly pay, you may also be eligible for long-term incentives in the form of stock options. You will receive access to comprehensive medical, vision, and dental coverage, short- and long-term disability insurance, life insurance, and paid parental leave. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year.

ITAR Requirements

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Equal Opportunity

Rendezvous Robotics is an Equal Opportunity Employer; employment with Rendezvous Robotics is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Source: Rendezvous Robotics careers (Greenhouse)

Similar roles

More roles at Rendezvous Robotics