Embedded Firmware Engineer - Humanoid (human)

Neura Robotics
Zürich, Switzerland
On-site

Who this role is best for

A natural match if you have experience with real-time embedded systems and motor control. The role demands deep technical expertise in ARM-based firmware and integration with ROS 2, alongside collaboration with multi-disciplinary engineering teams in Zurich.

Best fit for

  • Candidates with experience in real-time firmware for robotics or motion control systems
    — “4+ years in embedded firmware for real-time systems (robotics, motion control, automotive, industrial)”
  • Professionals familiar with distributed control systems and robust communication protocols
    — “Motor network supervision (CAN-FD/SPI/RS485)”
  • Engineers with a background in safety-critical firmware development and testing
    — “Design and run unit/integration tests for control and safety logic; support HIL / bench testing”
  • Those who have previously integrated firmware with ROS 2 or micro-ROS frameworks
    — “Integrate with micro-ROS / DDS-XRCE to expose the system as a single logical node to the main robot controller”

Things to consider

  • The role requires hands-on experience with hardware-software boundary debugging
    — “Comfortable reading schematics, understanding power and sensing hardware, and debugging at the HW/SW boundary”
  • Experience with dual-core ARM platforms is a clear differentiator
    — “Experience with ARM Cortex-M7/M85 platforms and dual-core debugging”

How to stand out

  • Highlight specific projects involving high-rate FOC and real-time control loops in your resume
    — “Implement and tune FOC / current, velocity, and position loops on ARM Cortex-M33 class motor controllers at ≥1 kHz”
  • Demonstrate your proficiency in FreeRTOS and real-time embedded systems during interviews
    — “Develop FreeRTOS-based firmware on a high-performance ARM Cortex-M7 central controller”
  • Showcase your work on sensor fusion or safety monitoring in prior roles
    — “Sensor fusion for encoders, force sensing, ToF, IMUs, and tactile arrays”
  • Emphasize your experience with calibration and firmware update mechanisms in embedded systems
    — “Implement calibration procedures, configuration management, and firmware update mechanisms”
  • Demonstrate familiarity with control theory concepts like impedance control and observers
    — “Familiarity with control theory (impedance control, observers, state estimation)”
Pace · Fast PacedCollaboration · HighAutonomy · MediumDecision Impact · Team

Derived from job-description analysis by Serendipath's career intelligence engine.

What success looks like

  • implement and tune FOC loops
  • develop FreeRTOS-based firmware
  • integrate with micro-ROS
  • design and run unit/integration tests
Typical background
4+ years in embedded firmware for real-time systems

Skills & requirements

Required

Embedded FirmwareRTOSFOCCan-fdSPIRs485Micro-rosROS 2Safety MonitoringUnit TestingIntegration TestingHIL Testing

Preferred

Control TheoryImpedance ControlObserversState Estimation

Stack & domain

CC++FreertosFOCCan-fdSPIRs485EthernetARM Cortex-m7/m85Micro-rosROS 2Control TheoryImpedance ControlObserversState EstimationTeamworkProblem-solvingCommunicationRoboticsMotion ControlAutomotiveIndustrial

About the role

Original posting from Neura Robotics via Ashby

YOUR MISSION & CHALLENGES

Our system runs high-density sensing and actuation at 1 kHz. Your firmware will keep the system stable, safe, and responsive. You will own the embedded software on the central ARM controller and the distributed motor controllers, implementing high-rate FOC, safety limits, and communication with the ROS 2 stack. You will work closely with electronics, mechatronics, and controls engineers to turn the architecture into a robust, testable embedded system.

  • Implement and tune FOC / current, velocity, and position loops on ARM Cortex-M33 class motor controllers at ≥1 kHz.
  • Develop FreeRTOS-based firmware on a high-performance ARM Cortex-M7 central controller:
  • Motor network supervision (CAN-FD/SPI/RS485).
  • Sensor fusion for encoders, force sensing, ToF, IMUs, and tactile arrays.
  • Safety monitoring, watchdogs, and power-loss handling.
  • Integrate with micro-ROS / DDS-XRCE to expose the system as a single logical node to the main robot controller.
  • Implement calibration procedures, configuration management, and firmware update mechanisms.
  • Design and run unit/integration tests for control and safety logic; support HIL / bench testing.
  • Work tightly with controls/AI engineers on interfaces, timing budgets, and observability.

WHAT WE CAN LOOK FORWARD TO

  • 4+ years in embedded firmware for real-time systems (robotics, motion control, automotive, industrial).
  • Fluency in C / C++ for microcontrollers and RTOS environments (FreeRTOS or similar).
  • Practical experience with BLDC motor control, FOC, and real-time control loops.
  • Experience with one or more of: CAN-FD, SPI, RS485, Ethernet in real-time systems.
  • Comfortable reading schematics, understanding power and sensing hardware, and debugging at the HW/SW boundary.
  • Strong focus on safety, reliability, and deterministic behaviour.
  • Experience with ARM Cortex-M7/M85 platforms and dual-core debugging.

micro-ROS / ROS 2 integration experience.

  • Prior work on servo drives or complex articulated robotic systems.
  • Familiarity with control theory (impedance control, observers, state estimation).

Source: Neura Robotics careers (Ashby)

Similar roles

More roles at Neura Robotics